Xerox CSX 2000, Installation Manual

Page: 164 / 266

154 Chapter 3 Upgrading the Software
Software Upgrade
To update the software:
1. Before you begin upgrading the CSX2000 Color Server software
you should backup your current configuration (refer to
“Configuration Backup and Restore” on page 206).
2. Exit the CSX2000 Color Server: from the Job menu select Exit ,
and then wait for the Creo icon to disappear from the windows task
bar on the right hand side.
3. Before updating the system to a new version, removal of the
current version is required. From the
Start menu, select Settings
>
Control Panel and then double-click on the Add/Remove
Programs icon.
4.
Select CSX2000 and then click Add/Remove .
5. Click Yes when prompted to remove the CSX2000 Color Server
application.
6.
Click Yes to All when prompted to remove all shared files, and
then click Yes to confirm.
Note : This section does not reload the operating system, if you need to reload
Windows NT, see “Reinstalling the Operating System” on page 106 for details.