Xerox C8 - DocuPrint Color Inkjet Printer, User Manual, Page: 61 / 458

Setting PPD File Parameters 47
Slip Sheet
Yes
inserts a sheet offset from the job stock between jobs or copies of a
job or at the end of uncollated stacks of pages.
No
does not insert any slip-sheets.
Finisher Module
To select the printed output’s destination, select a finisher module from
the list:
OCT
(Offset Catch Tray) prints to the output cache tray.
If your printer is equipped with an HCS (High Capacity Stacker), select:
HCS Top Tray
to print to the top tray.
HCS Stack Tray
to print to the stack tray, which is the internal tray.
If your printer is equipped with an HCSS (High Capacity Stacker
Stapler), select:
HCSS Top Tray
to print to the top tray.
HCSS Stack Tray
to print to the stack tray (usually for many pages or
copies).
HCSS Staple Stack
to print a document that is already stapled.
DFA Profile 1
/
DFA Profile 2
/
DFA Profile 3 / DFA Profile 4 /
DFA Profile 5
prints to the DFA (Document Finishing Architecture)
device. Select the desired profile according to the profile set in the Xerox
DocuColor 8000 Digital Color Press.
Finisher Offset
Yes
shifts the sheets when a new page number is delivered. For example,
if you requested three copies of each page uncollated, the printing
output sequence is as follows, Page1, Page1, Page1, Offset, Page2, Page2,
Page2, Offset, and so on.
No
does not use this printing method.
Staple Options
Landscape - Single TL
a single staple in the top left corner.
Landscape - Single TR
a single staple in the top right corner.
Landscape - Dual Right
two staples along the right side.
Landscape - Dual Left
two staples along the left side.
Landscape - Dual Top
two staples along the top.
Portrait - Single TL
a single staple in the top left corner.
Portrait - Single TR
a single staple in the top right corner.
Portrait- Dual Right
two staples along the right side.
Portrait - Dual Left
two staples along the left side.
Portrait - Dual Top
two staples along the top.
Table 4: PPD parameters
PPD Parameter Printing Options