Xerox C8 - DocuPrint Color Inkjet Printer, User Manual, Page: 332 / 458

318 Chapter 7 – Color Workflow
Step 4 of the Color Calibration Wizard appears.
14.
Center the cyan column under the alignment mark on the
densitometer. Slowly insert the
Image Density Calibration Chart
to
the X-Rite DTP32HS densitometer until it is automatically advanced
by the densitometer motor. The green light slowly flashes while the
chart is pulled through the densitometer and out the back.
A beep sounds when the scan is complete and the green light stops
flashing. A check mark appears next to the cyan icon and instructions
appear for scanning of the next column (magenta).
Note: If at any stage the scanning has not been completed properly, click Reset
and scan again.