Xerox C235, Quick Reference Manual

Page: 1 / 16

Xerox
®
C235 Color Multifunction
Printer Quick Reference Guide
Copy
M Maakkiinngg C Cooppiieess
1. Load an original document into the ADF tray or on the scanner
glass.
Note: To avoid a cropped image, make sure that the original
document and output have the same paper size.
2. From the home screen, touch Copy , and then specify the number
of copies.
If necessary, adjust the copy settings.
3. Copy the document.
Note: To make a quick copy, from the control panel, press
the Start button.
C Cooppyyiinngg oonn B Bootthh SSiiddeess ooff tthhee PPaappeerr
1. Load an original document into the ADF tray or on the scanner
glass.
2. From the home screen, touch Copy > Sides .
3. Adjust the settings.
4. Copy the document.
C Cooppyyiinngg M Muullttiippllee PPaaggeess oonnttoo aa SSiinnggllee SShheeeett
1. Load an original document into the ADF tray or on the scanner
glass.
2. From the home screen, touch Copy > Pages per Side .
3. Adjust the settings.
4. Copy the document.
Email
C Coonnffiigguurriinngg tthhee EEm maaiill SSM MTTPP SSeettttiinnggss
Configure the Simple Mail Transfer Protocol (SMTP) settings to send a
scanned document through e-mail. The settings vary with each email
service provider.
Before you begin, make sure that the printer is connected to a
network and that the network is connected to the Internet.
U Ussiinngg tthhee EEm maaiill SSeettuupp W Wiizzaarrdd iinn tthhee PPrriinntteerr
Before using the wizard, make sure that the printer firmware is
updated. For more information, refer to
Updating Firmware .
1. From the home screen, touch Email .
2. Touch and type your e-mail address.
3. Type the password.
• Depending on your e-mail service provider, type your account
password, app password, or authentication password. For
more information on the password, refer to the list of
Email
Service Providers , and then look for Device Password.
• If your provider is not listed, contact your provider and ask for
the Primary SMTP Gateway, Primary SMTP Gateway Port, Use
SSL/TLS, and SMTP Server Authentication settings.
4. Touch OK .
U Ussiinngg tthhee SSeettttiinnggss M Meennuu iinn tthhee PPrriinntteerr
1. From the home screen, touch Settings > E-mail > E-mail Setup .
2. Configure the settings.
• For more information on the password, refer to the list of
Email Service Providers .
• For email service providers that are not on the list, contact
your provider and ask for the settings.
U Ussiinngg tthhee EEm mbbeeddddeedd W Weebb SSeerrvveerr
1. Open a web browser, and then type the printer IP address in the
address field.
• View the printer IP address on the printer home screen. The IP
address appears as four sets of numbers separated by periods,
such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to
load the web page correctly.
2. Click Settings > Email .
3. From the Email Setup section, configure the settings.
• For more information on the password, refer to the list of
Email Service Providers .
• For email service providers that are not on the list, contact
your provider and ask for the settings.
4. Click Save .
EEm maaiill SSeerrvviiccee PPrroovviiddeerrss
To determine the SMTP settings of your email service provider, use the
following tables.
Gmail ™ ™
Note: Make sure that two-step verification is enabled on your
Google account.
To enable two-step verification, go to the Google Account Security
page, log in to your account, then from the Signing in to Google
section, click
2-Step Verification .
Setting
Value
Primary SMTP Gateway smtp.gmail.com
Primary SMTP Gateway
Port 587
Use SSL/TLS Required
Require Trusted
Certificate Disabled
Reply Address Your email address
SMTP Server
Authentication Login/Plain
1