manualshive.com logo in svg

Xerox 850DP - Phaser Color Solid Ink Printer, Manual

Share
Download
Xerox 850DP - Phaser Color Solid Ink Printer Manual Download Page 95

Version 10.0

Page 90 of 160

AccXES PJL Interface

FOLD_190

GERA_ISO

FOLD_210

GERA_ISO

FOLD_190_MARGIN

GERA_ISO

FOLD_ANSI_A

GERA_ANSI,

FOLD_ARCH_A

GERA_ANSI_SPECIAL

FOLD_7HALFX11

GERA_ANSI

FOLD_7HALFX11_MARGIN

GERA_ANSI

5.1.7.2.19 FOLDER_OVERLENGTH

When a plot length exceeds the length specified for the folder attached to the printer, this parameter

specifies the action. The plot may bypass its folding operation, or it may be sent to the folder anyway

for a z-fold operation. The possible values are BYPASS and ZFOLD. The default value is BYPASS.

5.1.7.2.20 FINISHPROGID

When a GFI finisher is attached to the system, this parameter determines which GFI finishing program

will be used for the job.  This is a string which is 32 characters long and it must exactly match one of

the program names found in the @PJL INFO XESFINISHER section of this document.  If the name

does not exactly match one of the program names or the word “BYPASS”, then bypass will be assumed.

5.1.7.2.21 FINISHPROGRAM

Begining in Version 9.0, this parameter, FINISH PROGRAM,  is no longer supported.  

This parameter may be used as an alternate method of determining which GFI finishing program will

be used for the job.  Each finishing program outlined in FINISHPROGID is associated with a number

from 1 to 20, with 0 being the “BYPASS” program.  The mapping from FINISHPROGID to

FINISHPROGRAM may be found in the @PJL INFO XESFINISHER section of this document.

5.1.7.2.22 FINISHTABS

Each GFI finishing program has a default value for whether tabs will be used for the finished output. 

This parameter may be used to override the default value and force the finisher to use tabs, not use

tabs, or just use the default specified by the finishing program.

5.1.7.2.23 FINISHPUNCH

Each GFI finishing program has a default value for whether hole punches will be used for the finished

output.  This parameter may be used to override the default value and force the finisher to use hole

punches, not use hole punches, or just use the default specified by the finishing program.

5.1.7.2.24 FINISHMARGINS

Each GFI finishing program has a default value for whether margins will be used for the finished

output.  This parameter may be used to override the default value and force the finisher to not use

margins, or just use the default specified by the finishing program.  Note that a user can not force the

margins on, only off.

5.1.7.2.25 FINISHCROSSFOLD

Summary of Contents for 850DP - Phaser Color Solid Ink Printer








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands