Version 10.0
Page 31 of 160
AccXES PJL Interface
The collection of user settable printer parameters with their corresponding HP-PJL environment
variables and their descriptions is shown in the following table.
The Attributes column describes the Read/Write attributes of the variable. Also, if the variable is a
standard HP-PJL environment variable, then this fact is indicated with “Std.”
The sections below describe in detail the meaning of the various environment variables/parameters.
Table: AccXES Environment Variable Summary
Parameter
HP-PJL Environment
Variable
Attributes
Parameter Description
Class: Communications
Parameters
Group: SCSI Port
SCSI Target ID
SCSITARGETID
R/W,
Integer
Sets the SCSI target ID of
the printer. Range: {0 - 7}
Default: 5
SCSI Port Enable
SCSIENABLE
R/W, Bool
Enables or disables the
SCSI host interface port.
Range: {ON, OFF} Default:
ON
SCSI Bus Termination
Enable
SCSITERMENABLE
R/W, Bool
Enables or disables the
SCSI bus termination on
the ESS. Range: {ON, OFF}
Default: ON
Group: EtherTalk Port
EtherTalk Port Enable
ETHERTALKENABLE
R/W, Bool
Enables or disables the
EtherTalk protocol on the
NIC. Range: {ON, OFF}
Default: ON
EtherTalk Phase
ETHERTALKPHASE
R/W, Enum
Sets phase 1, or 2
EtherTalk operation.
Range: {PHASE1, PHASE2
EtherTalk Type
ETHERTALKTYPE
R/W, String
Sets the type of printer for
the EtherTalk protocol.
Range: String max 32
chars. Default:
EtherTalk Zone
ETHERTALKZONE
R/W, String
Sets the name of the
EtherTalk zone for the
printer. Range: String max
32 chars. Default: “*”
Group: TokenTalk Port
TokenTalk Port Enable
TOKENTALKENABLE
R/W, Bool
Enables or disables the
TokenTalk protocol on the
NIC. Range: {ON, OFF}
Default: OFF
TokenTalk Type
TOKENTALKTYPE
R/W, String
Sets the type of printer for
the TokenTalk protocol.
String max 32 chars.
Default: “LaserWriter”
