manualshive.com logo in svg

Xerox 850DP - Phaser Color Solid Ink Printer, Manual

Share
Download
Xerox 850DP - Phaser Color Solid Ink Printer Manual Download Page 16

Version 10.0

Page 11 of 160

AccXES PJL Interface

STATUS = DELETE error

STATUS = Account(s) deleted

STATUS = RESTORE error

STATUS = Account(s) restored

STATUS = Accounting Disabled

STATUS = UNITS required for restore

STATUS = Max Accts exceeded

STATUS = Max Subaccts exceeded

STATUS = pjlErr in procXesAccounting

STATUS = INFO error

4.1.1.3 Command Syntax (6.2 and Later Release)

4.1.1.3.1  XESACCOUNTING Command

The XESACCOUNTING command was used for copy, scan, and print job accounting. With this release

of the software the AccXES Controller no longer provides a stand-alone accounting solution. The legacy

job accounting commands will be recognized and responded to, with an appropriate error.

 The syntax for the XESACCOUNTING command is:

@PJL COMMENT XESACCOUNTING ACTION=<action> [ACCTNUM=<account #>

SUBACCTNUM=<subaccount #>] [UNITS=<units>] [B=<bond area #> V=<vellum area #> F=<film

area #> S=<scan area #>]

Where ACTION values are:

•

 CREATE

•

 DELETE

•

 DELETEALL

•

 RESET

•

 RESETUSER

•

 RESETSYSTEM

•

 RESETALL

•

 RESTORE

4.1.1.4 Return Status (6.2 and Later Release)

After parsing the XESACCOUNTING command, the controller will echo the command, the appropriate

status, and a form-feed back on the channel as shown below:

Summary of Contents for 850DP - Phaser Color Solid Ink Printer








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands