Version 10.0
Page 57 of 160
AccXES PJL Interface
doesn’t exist in the printer.
The job will print without
any stamp in this case.
Range: String max 32
characters. Default: “”
Raster Stamp X Location
RASTERSTAMPLOCX
R/W, Float
The X coordinate of the left
side (low X coordinate) of
the raster stamp on the
physical page. Margins and
justification settings do not
affect the location of the
stamp. Can be specified in
inches or <center>, <left>,
<right>. The left side is
determined after rotation of
the stamp specified by
RASTERSTAMPROTATE.
Range: {0 - 1200, LEFT,
CENTER, RIGHT }.
Default: CENTER
Raster Stamp Y Location
RASTERSTAMPLOCY
R/W, Float
The Y coordinate of the
bottom side of the raster
stamp on the physical page.
Margins and justification
settings do not affect the
location of the stamp. Can
be specified in inches or
<top>, <center>, <bottom>.
The bottom size is
determined after rotation of
the stamp specified by
RASTERSTAMPROTATE.
Range: {0 - 1200, TOP,
CENTER, BOTTOM}.
Default: CENTER
Raster Stamp Rotation
RASTERSTAMPROTATE
R/W,
Integer
The rotation of the raster
stamp before it is applied to
the page. Specified
counter-clockwise from the
paper’s X axis. Range: {0,
90, 180, or 270 degrees}.
Default: 0
Raster Stamp Scaling
Mode
RASERSTAMPSCALEMO
DE
R/W, Enum
The scaling mode of the
raster stamp may be
specified to be relative to
the paper size or an
absolute percentage. The
value of the scaling (in
either mode) is specified
with the variable
RASTERSTAMPSCALING.
Range: {RELATIVE,
ABSOLUTE}. Default:
Raster Stamp Scaling
RASTERSTAMPSCALING
R/W,
Integer/En
um
The scaling of the raster
stamp before it is applied to
the page. The meaning of
