Xerox 470CX WorkCentre Inkjet Online User'S Manual Download Page 232

Page: 232 / 328

Book

TOC

Chapter

TOC

Search

7-12

LOAD DOCUMENT

You have attempted to
set up a sending
operation without
loading a document.

Load a document and
try again.

MEMORY FULL!

The machine’s
memory is full.

• Delete unnecessary

documents.

• Retransmit after

more memory
becomes available.

• Split the

transmission into
more than one
operation.

NO ANSWER!

The remote machine
has not answered and
all redial attempts
have been made.

Try again. Make sure
the remote machine is
operational.

NO. NOT ASSIGNED

The One-Touch or
Speed Dial location
you tried to use has no
number assigned to it.

• Dial the number

manually with the
numeric keypad.

• Assign the number

to a One-Touch or
Speed Dial button
and try again.

LCD Display

Meaning

Solution

Summary of Contents for 470CX WorkCentre Inkjet









































































































































































































































































































































Search results

Summary of Contents for 470CX WorkCentre Inkjet

Reviews:

Brands by name

Popular brands

Xerox 470CX WorkCentre Inkjet, Online User'S Manual

Search results

Summary of Contents for 470CX WorkCentre Inkjet

Reviews:

Brands by name

Popular brands