Xerox 470CX WorkCentre Inkjet Online User'S Manual Download Page 189

Page: 189 / 328

Book

TOC

Chapter

TOC

Search

6-19

Note:

You can also change Height and Width values by directly

adjusting the selection frame.

Note:

Output image file size is proportional to both Height and

Width. If both Height and Width values are doubled, then the image
area and image file size will increase four-fold.

Note:

Once you have confirmed or changed the size, resolution,

and final scan boundary settings, the scanning software determines
the size of the resulting scanned image and displays this information.

Summary of Contents for 470CX WorkCentre Inkjet









































































































































































































































































































































Search results

Summary of Contents for 470CX WorkCentre Inkjet

Reviews:

Brands by name

Popular brands

Xerox 470CX WorkCentre Inkjet, Online User'S Manual

Search results

Summary of Contents for 470CX WorkCentre Inkjet

Reviews:

Brands by name

Popular brands