Xerox 4215, Operator'S Manual

Page: 192 / 414

< cut top 2" cut 1">
DIIIIIIIIHHHHHHHHIIIIIIIIIIIII
4-60
Printing
printer itself. The default is 1024 K-
bytes. The default memory size should be
sufficient in normal printing situations.
If characters are missing in your printed
output, the memory size should be increased.
F
Resource Time Out: Amount of time the
printer can be idle before the settings on
this printout are no longer automatically
assumed to be valid.
F
Language Support: The output language of
the printer. Set by the Xerox service
representative at installation.
F
Offset Stacker: Yes or No. Set by you,
indicates whether the offset stacker is
being used.
A table at the bottom of the printout indicates
trays available, paper sizes in each tray,
dimensions of printable area and logical page.
The Xerox IPDS - IPDS Resident Fonts
The report contains the Firmware Version #, and
a listing of the IPDS resident fonts which
includes:
F
FGID: The hexadecimal (with decimal
equivalents in parentheses) values for each
font are indicated in the first two columns.
F
Width: The value in this column indicates
the size of the font in thousandths of an
XEROX 4219/MRP Mid Range Systems Printer
XEROX 4215/MRP Mid Range Systems Printer