![background image](http://html1.mh-extra.com/html/xerox/4050/4050_maintenance-manual_3400249048.webp)
Cleaning
6-2
Guide to Performing Routine Maintenance
CAUTION
Do not use cleaning cartridges or any types of fluids designed for
use in audio devices as these can damage your tape drive.
To clean the tape drive:
1. Insert the cleaning cartridge into the tape drive as you would
a data tape cartridge.
2. Observe the green LED blinking slowly to indicate that the
tape drive is automatically performing a cleaning cycle.
NOTE: If the cleaning cartridge has been used for more than
approximately 30 cleaning cycles, the amber LED will blink
rapidly. Press the unload button to eject the cleaning
cartridge and discard it.
3. Remove the cleaning cartridge after it is automatically ejected
following the cleaning cycle.
You can use the cartridge tape drive immediately after cleaning.
Summary of Contents for 4050
Page 12: ...Safety xii Guide to Performing Routine Maintenance...
Page 40: ...Fuser lubricant and pressure roll wiper 4 12 Guide to Performing Routine Maintenance...
Page 46: ...Inks 5 6 Guide to Performing Routine Maintenance...
Page 52: ...Maintenance and support services 7 4 Guide to Performing Routine Maintenance...