Guide to Performing Routine Maintenance
6-1
6.
Cleaning
This chapter describes the cleaning tasks you need to perform
regularly on your printing system.
Cleaning the keyboard, monitor, and the exterior of the printer
controller
Clean the exterior surfaces of your Printer Controller including
monitor and keyboard, as required. Clean daily, if possible.
Use the following supplies to clean the exterior surfaces:
•
Monitor: Use a soft, lint-free cloth dampened with a glass
cleaner. Do not spray the liquid directly onto the monitor since
it may cause damage.
•
Keyboard: Use a mild household detergent that has been
poured or sprayed onto a cloth lightly dampened with water.
Do not saturate the cloth; just dampen it.
•
Exterior: Use a mild household detergent that has been
poured or sprayed onto a cloth lightly dampened with water.
Do not saturate the cloth; just dampen it.
CAUTION
Do not allow liquids to drip onto anything electrical or
mechanical. For the same reason, never spray or pour the
cleaner directly onto the keyboard or the exterior surfaces of the
system.
Cleaning the 4mm cartridge tape drive
Clean the 4mm cartridge tape drive after every 25 hours of
actual tape operation. Use only a cleaning cartridge designed for
the 4mm cartridge tape drive. No fluids or other preparations are
necessary with the use of these cartridges.
Summary of Contents for 4050
Page 12: ...Safety xii Guide to Performing Routine Maintenance...
Page 40: ...Fuser lubricant and pressure roll wiper 4 12 Guide to Performing Routine Maintenance...
Page 46: ...Inks 5 6 Guide to Performing Routine Maintenance...
Page 52: ...Maintenance and support services 7 4 Guide to Performing Routine Maintenance...