Xerox 220 Setup Manual Download Page 109

Page: 109 / 116

Xerox Document Centre 220/230/332/340 Setup Guide

Page 7-3

Access Rights

ss Ri

ght

The following table illustrates a situation where various
privileges are assigned to five users.

- PIN 1234 enables its assigned user to enter the Setup

Tools and access only the Auditron and Access Setup
features. This user cannot access any other Setups.

- PIN 2345 enables its assigned user to enter the Setup

Tools and access the Machine Setups, Copy Setups,
and Fax Setups. This user cannot access any other
Setups.

- PIN 3456 enables its assigned user to enter the Setup

Tools and access the Print Setups and the Scan to File
Setups. This user cannot access any other Setup
buttons.

- PIN 5678 enables its assigned user to access Machine

Setups, Copy Setups, Fax Setups, Access Rights
setups and Auditron Setups on the DC220/230.

- PIN 4567 enables its assigned user to enter the Setup

Tools and access ALL of the Setups.

PIN

Key

Operator

System

Administrator

Auditron

Administrator

Owner

1234

2345

3456

5678

4567

Summary of Contents for 220





















































































































Search results

Summary of Contents for 220

Reviews:

Related manuals for 220

Brands by name

Popular brands

Xerox 220, Setup Manual

Search results

Summary of Contents for 220

Reviews:

Related manuals for 220

Brands by name

Popular brands