![background image](http://html1.mh-extra.com/html/xerox/2006npc-docucolor-color-laser/2006npc-docucolor-color-laser_getting-started_884757083.webp)
Adding memory to the Printer
1. Setting up the DocuColor 2006
Xerox DocuColor 2006
1-73
Adding memory to the Printer
You will need a phillips head screwdriver to perform this procedure.
CAUTION
•
Protect the memory card from static electricity by keeping it in the anti-
static bag until you are ready to install it.
•
Handle the card by the top or side edges only. Do not touch the card
components or the gold connector edge.
•
Avoid placing the card near magnetic devices, such as a pc monitor.
•
Avoid exposing the card to direct sunlight, high temperatures, or
humidity.
1.
Switch OFF the power to the Printer and to the Scanner.
301073A-WOL
0
2. Remove
the
three screws
from the upper right-hand side panel of the
Printer.
301083
301186
Summary of Contents for 2006NPC - DocuColor Color Laser
Page 1: ...DocuColor 2006 Getting Started The Document Company XEROX ...
Page 18: ...1 Setting up the DocuColor 2006 Installing the 2 Tray Module 1 8 Xerox DocuColor 2006 ...
Page 28: ...1 Setting up the DocuColor 2006 Unpacking the Printer 1 18 Xerox DocuColor 2006 ...
Page 48: ...1 Setting up the DocuColor 2006 Loading paper in the paper tray 1 38 Xerox DocuColor 2006 ...