5
1. Find a location for the solar panel that receives direct sunlight for a minimum of
6-8 hours a
day; and
is within 15’ of where the Security Light will be installed.
2. Mark the holes through the mounting template.
3. Using a 3/16” drill bit, drill holes in the spots you marked.
4. Gently tap the mounting anchors into the holes until they are flush with the
mounting surface.
5. Place the base of the solar panel over the drilled holes—secure the screws
through the base into the plastic mounting anchors.
6. Extend the cord from the solar panel to the light box—completely insert the cable
plug into the INPUT hole located on the bottom of the light unit.
7. Adjust the motion detection sensor and camera towards the desired coverage
area.
Light/Camera Functions:
OFF: Neither the light nor the camera will function; the product will be
completely off, but the solar panel will keep charging the battery.
AUTO: The LED light will illuminate for 1 minute when motion is detected
at night. The camera will turn on when motion is detected during the day or
night. Motion will be recorded for 10 seconds each time.
TEST: The LED light will illuminate continuously for 5 minutes
and flicker
for 1 minute
to ensure the appropriate settings are in place. For a period of 6
minutes, the camera will turn on and record 10 seconds of video or
photography when motion is detected. (Be sure to switch the device to AUTO
when testing is complete.)
