4
Installing the LED Security Light:
1.
Mark holes on the wall through the Installation template.
2.
Drill holes with a 3/16
”
drill bit.
3.
Gently tap the plastic anchors into the holes until they are flush with the mounting
surface.
4.
Secure the screws into the plastic anchors—leave approximately 3/16” of each
screw exposed for mounting the unit.
5.
Place the light/camera unit over the screws—gently push down on the unit to
slide the screws into locking position.
6.
Rotate/tilt the motion-detection sensor/camera towards the desired coverage
area.
Installing the Solar Panel:
