3
High-efficiency, rechargeable lithium battery produces zero emissions
Product Profile:
1. Lamp Head
2. Motion Activated Indicator
3. Motion Sensor Lens
4. Built-in Camera
5. Antenna
6. Battery Housing
7. Horizontal Adjust Knob
8. Vertical Adjust Knob
9. Adjust Knob
Installation Recommendations:
The PSD3 light fixture should be installed on a flat and stable surface—the
higher the light is placed, the larger the area of illumination.
Avoid installing the light near an air conditioner, heater, or high-voltage
system, since quick changes in temperature may activate the motion-
detection system and run down the light’s power.
Avoid positioning the motion sensor head towards street traffic, or where
other movements may trigger the light needlessly and drain the battery.
The solar panel should be installed facing the sky where direct sunlight can
shine on the panel at least 6-8 hours per day. (Before initial use, the panel
will need 2-3 days of sunlight exposure to fully charge the battery.)
The motion sensor is most sensitive to movement across the device, and
less sensitive to motion directly towards or away from it.
Periodically use a soft, damp cloth to clean accumulated dust or snow off of
the solar panel. This will preserve the panel's battery charging efficiency.
