XMR User Manual 1.1
33
Testing the XMR
1.
Once the XMR firmware has been updated, test its ability to transmit.
2.
Make sure the XMR has an active Iridium account. Xeos can setup an account for you if
you do not currently have one. Ensure you have access to one of the destinations to
which messages are sent.
3.
Place the XMR outside in a location where it has a clear view of the sky and connect it
to an external power source.
4.
Check the messaging destination to see if a transmission has been received. If no
message is received within 20 minutes, please check operating manual to ensure it is
setup as required.
5.
If no message is received, please contact Xeos for assistance in troubleshooting.
6.
DO NOT redeploy the XMR until Iridium transmission is confirmed.
Summary of Contents for XMR Series
Page 1: ...1 XMR User Manual Waterproof Iridium Data Transceiver Version 1 1 February 2021...
Page 36: ...XMR User Manual 1 1 34 Appendix D Mechanical Drawings...
Page 37: ...XMR User Manual 1 1 35...
Page 38: ...XMR User Manual 1 1 36 Appendix E Cable Drawings A 05 090 XMR Power Communications Cable...
