Xeos XMR Series, User Manual

Page: 32 / 40

XMR User Manual 1.1 32

All commands to Xeos devices start with a dollar sign ($) but STerm automatically
adds this to all commands.

A ver command will print out the product type and firmware version currently
installed in the device.
8. At the top of the window, navigate to Send File > Send Bootload Image. A new inset box
appears.
9. Use the “…” button next to Verify to browse to the .bin file extracted from the firmware
package. Note that the firmware version of the new package will be populated on choosing
the file.
10. Press Send File. The transfer will begin immediately and will take approximately five
minutes.

If the transfer is interrupted for any reason (disconnect/power loss) the partial image
will be discarded without corrupting the firmware. The process can be restarted without
issue.
11. When the transfer is fully complete, press Hide/Cancel.
12. Return to where commands are issued to the device and send a resetnow command.

On resetting, the old firmware file is replaced with the new version over a period of
approximately five to ten seconds.
13. Send the ver command to the device, confirming that the new version has been installed.
On confirmation, the procedure is complete.