XMR User Manual 1.1
12
Once XeosOnline has a device’s unlock code, all outgoing commands will have the code added at
the beginning of the message. The unlock code will only be changed if the firmware is updated,
or if commanded via:
$unlock
XXXXX
YYYYY
Where
XXXXX
is the current code, and
YYYYY
is the new code to be used in the future.
Sending the Command
To send an sbd command, create a new email message with the following fields:
To
Subject
The target device’s IMEI
Body
Empty
Attachments
The .sbd file
A confirmation will be immediately returned from the Iridium Gateway from the address
[email protected] indicating that your message is now in the message queue. It will
be delivered to the device during its next Iridium check.
Commands can be sent from any email address, but responses will be returned only to email
addresses on the unit’s forwarding list.
Summary of Contents for XMR Series
Page 1: ...1 XMR User Manual Waterproof Iridium Data Transceiver Version 1 1 February 2021...
Page 36: ...XMR User Manual 1 1 34 Appendix D Mechanical Drawings...
Page 37: ...XMR User Manual 1 1 35...
Page 38: ...XMR User Manual 1 1 36 Appendix E Cable Drawings A 05 090 XMR Power Communications Cable...
