Xeos Technologies Inc. Alert Geomatics Xi-100b, User Manual, Page: 6 / 33

Xi-100b User Manual Version 4.1 6
Each IMEI number is capable of being associated with up to five (5) unique destinations; this may
vary between service providers. When registering your IMEI, please provide the service provider
with the temporary Xeos testing account email address:
xeosbeaconb@gmail.com
Setting up this email address allows for better technical support during the initial learning period
for the product. Once service is activated, please notify the technical support team.
While any email application can be used to send and receive messages to the Xi-100b, XeosOnline
is the easiest way to manage and monitor multiple devices. The messages contain various types
of information and XeosOnline presents that information in a human-readable format.
RUDICS
If the best choice is to use a RUDICS tunnel, please contact Xeos for assistance in setting up and
managing a RUDICS tunnel if you do not already have one established. It should be noted that
the Xi-100b cannot initiate RUDICS connections independently; SBD commands must be sent to
the device while it is in the field to begin RUDICS connections. As a consequence, an SBD plan is
required when using RUDICS service with this device.
Communicating with the Xi-100b
Special email commands are used to communicate with the Xi-100b to configure settings and
take specific actions. These commands are sent as email attachments, but can alternatively be
sent via XeosOnline. All commands are given ‘over the air’ and the Xi-100b’s antenna must have
a good view of the sky to receive these commands.
Attaching Email Command Files
All command messages must be sent to the following email address:
data@sbd.iridium.com