Xeos Technologies Inc. Alert Geomatics Xi-100b, User Manual, Page: 13 / 33

Xi-100b User Manual Version 4.1 13
Setting Timers
To change an event interval in the Xi-100b, use the command format below, with the base
command $timer
$timer item enabled time
$timer sbd y 1h
The above command enables SBD messaging and sets the timer for 1 hour.
Timer Description
SBD Iridium message timer
ESP Start-up period timer; when elapsed, the Xi-100b will turn off diagnostics and LEDs
QQV Quanterra quickview timer
QST Quanterra status message timer
SEN Sensor report timer (Vaisala)
Settings
Issuing a $settings command, either serially or over Iridium, will return the full settings of the
Xi-100b. An example of the readout is below: