Xeos Technologies Inc. Alert Geomatics Xi-100b, User Manual, Page: 12 / 33

Xi-100b User Manual Version 4.1 12
Continuous RUDICS
Minutes $rdcscontmins X Sets a time limit on any subsequent continuous
connection and initiates a RUDICS continuous
connection.
Start/Stop RUDICS
session $rdcs X 1 = Initiate a RUDICS session
0 = Stop a RUDICS session
RUDICS Number $rdcsnum X Sets the number to dial the Iridium gateway to
start a RUDICS session; this is the number given to
your RUDICS group (8816 number). Add two
leading zeros to this number (008816…)
IP Settings
IP Address (Xi-100b)
$eip Sets the Xi-100b’s IP address; should be set to be
on the same subnet as the peripheral device.
Mask $enmask Set the Xi-100b’s Net Mask
DefRtr $DefRtr Shows the Xi-100b’s Router IP address; it should be
set identically to the Gateway IP of the peripheral
device.
All IP Settings to be set in the Xi-100b are space delimited ; an address of 192.168.10.2 would
be entered as 192 168 10 2
Schedule and Timers
The $sched command displays a list of all scheduled actions on the Xi-100b:
The $rprt command displays the schedule along with other status information and settings. It
also displays the last Iridium sessions heater and registration statistics. This information also
prints to diagnostics after an Iridium session is concluded regardless of sleep mode.