22
English
Important
If you want to remove the charger from the battery, it’s important that the charging
process is always completely finished. As such, the charging process should only be
stopped when the green LED lights or blinks. If the charging process is interrupted
before it is completed, the battery loses its charge and its acid balance.
When disconnecting the battery or at interruption of the mains voltage, the current
charging process will stop. When a battery is re-connected or the mains voltage is
present again, in both cases a new charging process will start.
When a problem is detected at the start or during the charge process, a number will
appear in the display which indicates a certain error. Consult the ‘Charge Status’ and
‘Trouble Shooting’ for the right actions.
C H A R G E S T A T U S
The charging process can be followed by means of the red, yellow and green LED. If an
error occurs during the charging process an error message will be displayed on the
display.
Consult “Trouble shooting” for the error messages.
Red
LED
Yellow LED
Green LED
Error
display
lights
blinks
lights
blinks
Boost
X
Equalize
X
Compensate
X
Float
X
Jogging
X
Reverse polarisation or
no battery present
1
Battery Voltage too low
2
14 hour limit
3
Temperature protection
4
Battery sulphated
5
Temp.sensor error
6
