Xenteq ISO 230, User Manual, Page: 10 / 18

10
English
Settings menu
The isometer's settings may not be changed. If the settings
were to be changed, it may be the case that the isometer will
no longer work as the NEN 1010 standard prescribes. The
Menu button has, therefore, been protected with a password.
If you have a real reason why you would want to change the
settings, please contact us.
Information display
E01= PE connection error, no low resistance between E and
KE.
E02= system connection error, no low resistance between L1
and N.
E03 to Exx = internal error report.
= password activated
G U A R A N T E E A N D S E R V I C E
The ISO series is supplied with the Xenteq
"Smart Value" service label. This label will give
you additional benefits and assurances with
regard to service. Read more about this on our
website.
You can take the device back to your supplier or send it
straight to the address on the reverse should there be a fault.
Please ensure you pay for the postage when sending the
isometer. The ISO series has a 2 year guarantee as from the
purchase date on the parts and labour costs related to its
repair. The guarantee period is only applicable if the purchase
form (copy) is submitted when the isometer is sent in for
repair. The guarantee will no longer apply with regard to repair
work performed by third parties, when used incorrectly or with
the connection of the inverter.
The customer is responsible for the use of this isometer. The
manufacturer cannot be held liable for any (consequential)
losses.