Xenteq HDC Series, User Manual, Page: 20 / 46

20
EN
Working sequence:
1. Fit + and – cable to ' battery output' and connect it to the second,
accessory battery.
2. Fit + and – cable to ' battery input' and connect it to the starting battery.
3. Mount + and – cable on ' solar input' connect it to the solar panel (if
present).
4. Make connection between connection and ground vehicle.
6. D+ connect between alternator and HDC converter.
Often alternators no longer have D+. In that case, use the ignition lock.
-
After assembly, check whether all cables are connected to the correct poles.
Reverse polarity can damage the converter.
-
If, in exceptional cases, you still want the charging converter to be always on,
you can connect the ' ignition ' connection to the + battery input or to the +
of the starter battery.
-
For dismantling, follow the reverse working order.
After connection, the converter starts up automatically, provided that the
switch-on values are met.
Important
Disconnect the converter completely if it is not used for a long period of time.