XENO XDR960, User Manual

Page: 38 / 133

User’s Manual | 38
In
“DATE/TIME SET,” user can activate DST (Daylight Saving Time). Select the time synchronization server and other basic
settings like time zone/time format.
Keyboard ID: users must setup Keyboard ID to match the ID setting in keyboard, if user wants to use a keyboard to control the
DVR. The user also needs to select the KEYBOARD model and BUAD RATE setting.
Remote ID: users must setup the Remote ID to match the ID setting in the IR remote controller in order for the remote to
function.
Upgrade: Users can easily upgrade the system in
“Upgrade” menu via USB/FTP server, upon the selection as shown below:
N
OTE There are two types of TIME SYNC MODE.
1) Server Mode
The operating DVR is set as a Time Sync Server, which can synchronize the time clock of another
DVR(s) connected over same network environment.
2) Client Mode
The operating DVR is set as one of the client DVR(s). Input the IP No of designated DVR, Advanced
Client Software (ACS), or Central Management System (CMS), as a Time Sync Server in
“SYNC
SERVER
”; and then its time clock is synchronized with Time Sync Server by
setup time in
“SYNC
CYCLE
”.