53
/
56
2. Files of other formats are mainly the JED files. The system saves data in the
buffer in a JED file after reading the chip. You can use this format the next
time you load the file.
5.2
Other
Messages
Other error messages are explained below.
•
Please
edit
ʹ
Auto
ʹ
first
: The Auto consequence is blank. Edit Auto and try
again.
•
Enter
a
string
to
search
for
: The Hex Edit Search dialog box is blank. Make
sure, to enter a specified string or ASCII codes to search for in the Buffer Edit
dialog box.
•
The
string
for
search
is
blank
. Input it in Search dialog: Enter a string in the
Buffer Edit dialog box. Then you can use
the
first
time
search
,
Continue
to
search
, or
Search
Next
functions.
•
Search
pattern
not
found!
: The system did not find a matched string or
ASCII code.
•
User
chip
is
MfgID
=
0089,
DeviID
=
0051
: This display on the Operation
Information window indicates that the chip's ID detection function detected a
different ID than specified in the manual.
•
ID
check
error.
Ignore
: You can ignore the detected ID error and continue the
operation.
•
ID
check
error
: The operation stops because of the ID check error. If you have
good knowledge of this chip, you may ignore the ID error and continue the
operation. Exercise caution to avoid damaging the chip.
•
Pin
check
error.
Ignore
: The system indicates an error during the pin check.
Ignore it and continue.
•
Pin
check
error
: An error occurred during the pin check, and the operation
ceased.
•
Programmer
not
found
: The programmer is not connected to the PC or it is
