33
/
56
When the option “Enter protected mode after loading the project” is selected, Dialog
“Protected mode Setting” pops up. Please refer to “Protected mode” for details.
Dynamic Password: Please refer to “Load project” and “Password Generator” for
details.
4.2.3
Manage
Project
Library
The stand-alone operation is when the programmer hardware is not connected to a
computer, and uses information saved in its own module for volume production. The
stand-alone file includes all the information needed for programming the device. This
enable the user to prepare the project file(s) before starting the programmer's operation.
The project file being saved in the stand-alone mode will be manageable using
Manage
Project
Library
function. This type of file can be stored in the SD card
incorporated in the programmer.
NOTE
: 1) Besides using
Manage
Project
Library
function, user can also copy the
project file(s) by SD card replication;
2) SD card's file system must be FAT32.
The figure below shows a typical
Manage
Project
Library
window
