19
/
56
NOTE:
The red device name means that such device(s) need authorization to use.
3.2.3
Load
data
into
buffer
One can load data into the buffer by reading data either from a file or a master chip.
To read data from a file, select
Load
File
from the
File
menu. The system
displays the
Load
File
dialog box. To make sure the loaded data is correct one
can review the information in the
Buffer
window.
NOTE
: Some
Hex
or
S
record
files contain non-zero file initial address. In this
case, enter the start address in the File Address box.
To read the data from a master chip, complete the following steps:
o
Insert the master chip in the socket.
o
Select
Read
on the
Device
Operation
window in the main screen. The
data will be copied from the master chip to the buffer memory.
o
To make sure the loaded data is correct one can review the
information in the
Buffer
window.
o
If desired, you can save the data to a disk for later use.
NOTE
: The read function is not available for some devices, including those
have been encrypted.
