47
information about the pin, the size, the current buffer data and data file name.
Since the buffer data may have been revised, the buffer data may differ from the
data of the data file and the revised buffer data prevail.
All Operation Option settings.
The content of the ‘Auto’ mode
The project saves all the preparations before the programming. The user can restore
the saved working environment.
Note: The project content is related to the programmer software. If the software has
upgraded or has been re-installed to another folder, the saved project files become
ineffective.
4.1.5.1 Load Project
Load the specified project file by selecting the file in the File dialogue box.
According to the information in the project file, replace the device and change the
buffer data, reset the operation options, etc.
4.1.5.2 Save Project Files
Save the current working environment to a specified project file. To ensure the
security of the data, the user can encrypt the project file. Refer to “Security and
Password Input”.
4.1.5.3 Downloading Library (Standalone)
Under standalone mode, the programmer is directly used to program the chips by
using the information saved in its own module with no connecting to a computer. It is
applicable for the volume-production. With the help of the insertion contact test, the
user does not need to know the detail about the use of the programmer, what he needs
to do is just to insert and take out the chip correctly.
Before the standalone operation is started, the corresponding standalone file should be
prepared for the programmer with the standalone operation function. Based on the
project file, all the information needed for programming the device is saved in the
standalone file so that it can be transferred to the storage module of the programmer
hardware.
NOTE:
SUPERPRO/6100 and SUPERPRO/611S provide this function. SUPERPRO/610P
doesn’t support offline mode.
How to create a downloading library?
Create a project file. Under the standalone mode, the programmer can program
the devices of the same model according to the different requirements, or program
different devices. The maximum number of the programming methods that the
