![Xeltek SUPERPOR/6100N Manual Download Page 13](http://html1.mh-extra.com/html/xeltek/superpor-6100n/superpor-6100n_manual_3240139013.webp)
13
2.1.4 The hardware and driver installation
Connect the programmer module to your computer through the USB port. Turn on the
programmer power switch.
After the application software is installed, the driver installation for the first time
connection between the computer and the programmer module becomes very simple.
You only need to wait until new hardware wizard finishes the installation. The
following interfaces will appear on the screen one after another:
The actual interfaces may be somewhat different from the above ones. Anyway the
user should wait until the installation finishes. Please don't run any other programs
during the installation
2.1.5 Running the application software for the programmer
The application software for the programmer has a standard Windows UI, including
pull down menus and buttons, etc. The user should have some knowledge about the
MS Windows OS and be able to use the computer mouse well.
After the application software for the programmer is started, it will communicate with
the programmer immediately and start the initialization. If the communication fails,
please check according to the following steps:
One programmer module. Check the connection between the programmer
hardware and the computer, and turn on the power switch.
Follow the correct installation steps. If the programmer hardware is connected
to the computer before the programmer application software is installed, the
computer will detect the new hardware and the following window will appear.