MM-202BX
Installation Manual
This document is subject to change without prior notice.
8
3. Getting to Know the MM-202BX
3.1 Front View
Figure 2 MM-202BX Front View
3.2 Top View
Figure 3 MM-202BX Top View
UPLINK
Activates when the MM-202BX’s UPLINK port is connected to the Backbone.
Blinks during data transmission between the MM-202BX and backbone.
ACT1
(PCS) Blinks when PLC signals are detected.
ACT2
(LINK) Blinks when the detected PLC signals are valid.
PWR
Activates when power is turned on.
UPLINK
RJ-45 Ethernet port (WAN port)
EXT
RJ-45 Ethernet port (LAN port 1)
LAN
RJ-45 port for UART signal (optional use)
SIG1
RJ-11 port for connection to CU-100A PLC Coupler
SIG2
RJ-11 port for connection to CU-100A PLC Coupler
RESET
Resets the MM-202BX to factory default mode.
(Caution!)
Reset button (inside 5
th
hole from left)
