7.
HRM – Heart Rate Monitor Connection
(1). SET HRM Setting Procedure for Bluetooth or Ant+ connection
1.
Under the “STAND BY” mode, press and hold the
"RESET" key for 3 seconds to display SET HRM
program.
2.
After pressing the ENTER key, 4 metrics (time,
strokes, calories, distance) will be flashing.
Please use the "UP / DOWN" button to cycle choose the
(2). BLUEBOOTH or ANT+ wireless Connection
1.
After displaying SET HRM for 2 seconds, the screen
will switch to the screen as the left drawing.
2.
Connect to the corresponding wireless chest strap via
Bluetooth or ANT+ serial number
3.
If there is a signal to successfully connect to the
Bluetooth or ANT+ wireless chest strap, the screen will
display as shown in the drawing on the left.
(3). How to use BLUEBOOTH wireless Connection
1.
If you are using a Bluetooth wireless chest strap, the
console will display “BLE” on the screen as shown in the
drawing on the left.
2.
Pressing the ENTER button, then the PULSE section
on the screen will display "b" as shown in the drawing on
the left.
3.
The Bluetooth wireless chest strap has been
successfully connected to the console now.
Summary of Contents for ROWER SMART CONNECT 2.0 BA+
Page 1: ......
