(4). How to use ANT+ wireless Connection
1.
If you are using an ANT+ wireless chest strap, the
console will display “ANT” on the screen as shown in
the drawing on the left.
2.
Pressing the ENTER button, then the PULSE section
on the screen will display "A" as shown in the drawing
on the left.
3.
The ANT+ wireless chest strap has been successfully
connected to the console now.
(5). How to reconnect BLUEBOOTH / ANT+ wireless Connection
1.
If the Bluetooth or ANT+ chest strap signal is
not successfully received within 25 seconds, the
screen will display the "failure" link failure screen as
shown in the drawing on the left.
2.
Press RESET to disconnect the wireless
connection.
3.
Repeat the 7.1 HRM-Heart Rate PROGRAM >
Set HRM Setting Procedure to reconnect BLUEBOOTH / ANT+ wireless Connection
Summary of Contents for ROWER SMART CONNECT 2.0 BA+
Page 1: ......
