Xebex Fitness AB-1, Assembly Instructions & Owner'S Manual

Page: 12 / 15

Use 3-in-1 OIL only. Do not use anything else!
1.
Pedal Check : (Monthly):
Tighten the pedals with a 15mm wrench. The right side pedals will tighten “righty tighty” (clockwise)
and the left side pedal will tighten “lefty tighty” (counter-clockwise).
2. Handlebar Assembly Check (Monthly)
I
nsert Screw Driver through peg of bike and tighten
3. Handlebar Assembly Check (Monthly):
Tighten the handlebar using a 22mm wrench. Tighten these down as tight as possible for both sides.
Next, tighten handlebar assembly peg nut with 22mm socket wrench.
Note: There will be a little play
in these arms after tightening but this is normal.
XEBEX AIR BIKE
Maintenance Information
Service Daily Monthly Quarterly Annually
Clean/Dry Frame & Console w/ mild soap and cloth X
Inspect Unit for Noise or loose components X
Ensure Unit is level-Adjust Stabilizer Feet X
Tighten Crank & Bell Crank Bolts, Tighten Pedals X
Tighten Seat Bolts X
Tighten Handlebars X
Check and Tighten Linkage Arm Pivot points X
Change Console Batteries X
Lubricate Chain X
Inspect & Adjust Chain Tension if Needed X
Tighten Main Frame Bolts and Stabilizers X
-See detailed instructions below