!
change the value, change the data to 00400, and then press [ENT] for more than 2s to complete
the setting.
;
To understand frequency transmitter operation instructions,
please refer to the TA-MF series SetPro microcomputer-based
frequency isolation transmitter instruction manual.
5) The operating table adjusts the speed about 1500r/min;
6) Install the top iron and the stopper on the main top device so that the two main top oil
cylinders can run synchronously;
7) Enter the "rotation angle correction" interface, operate the main top cylinder retract to
the end, make a mark, the main top cylinder advances for 1 minute to stop, measure the amount
of advancement of the main top cylinder (unit mm), this data is the advancing speed mm/ Min,
fill this data into step 1;
If the two main jacking cylinders cannot be synchronized, the two main jacking cylinders are
added together and divided by two.
8) The main jacking cylinder continues to advance, and when the
frequency transmitter data is stable, press [OK] in step 2;
9) The main jacking cylinder retreats to the end, according to step 3 of
the [return to zero];
10) The main jacking cylinder is advanced to the end, measure the actual extension of the
main top (mm), fill in the data column of step 4, and press [to obtain the forward
distance];
11) After the main jacking cylinder is back to the end, press [OK] in step 5.
59
Summary of Contents for XDN450
