XCMG XDN450, Operation Manual

Page: 76 / 126

!
damaged due to the operator's change of settings, the user is responsible for it.
Enter the "solenoid valve operation setting"area
：
!
The pipe jack is set according to the above figure before leaving
the factory. When it is found that the button does not match the
action, it needs to be reset.
Setting method: send electricity to the
head, press and hold the ! key, check the movement of the head, and the pull-down
option is the same as the actual action. Follow the same method to set up 10 actions one by one.
After setting is complete, use the actual buttons of the console to test whether the action is
correct.
Be careful not to set the repetitive movement to avoid damage to the equipment
during construction operations when setting the solenoid valve in the pipe jacking
machine.
Enter the "Electromagnetic Valve Action Settings" area:
55