XCMG XDN450, Operation Manual

Page: 5 / 126

!
Chapter One Safety part
This manual in the first part lists safety requirements and any users must observe these
safety requirements when operating the machine so as to minimize possible dangers and injuries!
We adclamp any operator should carefully read this instruction manual in advance,
especially the parts with regard to safety, and operation of the machine, otherwise it may bring
you some unnecessary bothering due to some minor mistakes.
Do’s and Don’ts
：
1.Users must operate XDN450 pipe jacking machine in accordance with instruction
manual.Any other usages are forbidden.
2.Workers must observe the safety requirements in assembling the machine.
3.The unauthorized or untrained are not allowed to operate it.
4.Construction personnel must wear appropriate safety clothing, such as rubber insulating
gloves and boots.
5.Please keep the control panel, pedal plate and handle clean, and regularly check the oil
channels and lubrication grease to avoid possible dangers.
6.Joystick and rubber pipe can’t be used as handle to avoid any mistakes in operation.
7.Please line out the construction area in advance and set some warning marks around it.
8.When two people conduct the operation and maintenance at the same time, one should
monitor the other’s security and operation.
9.Only when the whole set of machine is off power, user can conduct maintenance work
alone.
10.In maintenance, monitors can touch the emergency stop switch in any time.
11.There should be adequate lighting in the construction areas.
12.The operator and monitor should keep in good connection and be familiar with signal-
sending ways.
13.Please check the emergency stop switch before and after usage.
To prevent electric shock, please ensure that the console and the electric control cabinet are
grounded before operation, and be sure to use the attached grounding copper rod to avoid danger.
Product information ! 16