Copyright | C6AM User Manual, Version 1.2.2
39
FCC Information
To whom it may concern,
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For class A digital device:
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the device.
This equipment should be installed and operated with minimum distance of 20 cm between the radiator
and your body.
FCC ID:
2BCXO-C6AM
To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end
product Contains Transmitter module FCC ID:2APNR-GM500U1A
Wireless module operating parameters
4G module
FCC ID: 2APNR-GM500U1A
RFID module
No
Project
Content
Specifications
1
Operating
Frequency
13.56MHz
2
Maximum
transmission
power
7.67 dbuV/m @ 3m
3
Antenna
0 dbi
4
Working limit
-40 °C to +65 °C
5
Operating
voltage
3.0V to 3.6V
6
Support card
ISO14443TypeA; M1; MIFARES50,S70
7
Standards
ISO/IEC14443TypeA
8
Comm rate
106kbit/s212kbit/s424bit/s
9
Modulation
ASK
10 Antenna
PCB Integrated
