XCell Ion-X
2
Assembly Manual
Created: 8/25/2007
Copyright Miniature Aircraft USA
Page 85 of 123
This document may not be distributed without permission of Miniature Aircraft USA
6A.3 – Install Bell Mixers
6A.3.a
6A.3.b
Building Notes - Select the bell mixer with the inserted bolt and thread it into the rear hole on the blade grip tighten it until just
before the assembly is fully tight. Check the rotation of the bell mixer. If it does not move freely, slightly loosen the bolt until it does.
Now repeat this procedure for the remaining bell mixer and blade grip.
#0097
Outside hole
#0562-1
