Thank you for your purchase of your RAZORWELD ARC Welding Machine.
We are proud of our range of welding equipment that has a proven track record of innovation, performance and reliability.
Our product range represents the latest developments in Inverter technology put together by our professional team of highly skilled engineers. The
expertise gained from our long involvement with inverter technology has proven to be invaluable towards the evolution and future development of our
equipment range. This experience gives us the inside knowledge on what the arc characteristics, performance and interface between man and machine
should be.
Within our team are specialist welders that have a proven history of welding knowledge and expertise, giving vital input towards ensuring that our
machines deliver control and performance to the utmost professional level.
We employ an expert team of professional sales, marketing and technical personnel that provide us with market trends, market feedback and customer
comments and requirements. Secondly they provide a customer support service that is second to none, thus ensuring our customers have confidence
that they will be well satisfied both now and in the future.
Xcel-Arc welders and plasma cutters are manufactured to be compliant with - AS/NZ 60974-1, guaranteeing you electrical safety and performance.
WARRANTY
• 3 Years from date of purchase.
•
ESSETI New Zealand Limited warranties all goods as specified by the manufacturer of those goods.
• This Warranty does not cover freight or goods that have been interfered with.
• All goods in question must be repaired by an authorised repair agent as appointed by this company.
• Warranty does not cover abuse, misuse, accident, theft, general wear and tear.
• New product will not be supplied unless ESSETI New Zealand Limited has inspected product returned for warranty and agrees to replace product.
• Product will only be replaced if repair is not possible
• Please view full Warranty term and conditions supplied with machine or at
www.XcelArc.nz/warranty-terms/
or at the back of this manual.
ATTENTION! - CHECK FOR GAS LEAKAGE
At initial set up and at regular intervals we recommend to check for gas leakage
Recommended procedure is as follows:
1.
Connect the regulator and gas hose assembly and tighten all connectors and clamps.
2.
Slowly open the cylinder valve.
3.
Set the flow rate on the regulator to approximately 8-10 L/min.
4.
Close the cylinder valve and pay attention to the needle indicator of the contents pressure gauge on the regulator, if the needle drops away towards
zero there is a gas leak. Sometimes a gas leak can be slow and to identify it will require leaving the gas pressure in the regulator and line for an
extended time period. In this situation it is recommended to open the cylinder valve, set the flow rate to 8-10 L/min, close the cylinder valve and check
after a minimum of 15 minutes.
5.
If there is a gas loss then check all connectors and clamps for leakage by brushing or spraying with soapy water, bubbles will appear at the
leakage point.
6.
Tighten clamps or fittings to eliminate gas leakage.
IMPORTANT! - We strongly recommend that you check for gas leaks prior to operation
of your machine. We recommend that you close the cylinder valve when the machine is
not in use.
Esseti NZ Ltd, authorised representatives or agents of Esseti NZ Ltd will not be liable or
responsible for the loss of any gas.
RAZORWELD™ ARC 630 - MMA/CAG/TIG Welder Manual
|
3
ARC
63O
WARRANTY
