Wireless Key Telephone Handset
- 24 -
Base Unit
To remove power from the Base Unit by unplugging port 1
Place Dip Switch 1, in the up position, turning if off, while leaving switches 2 and 3 in
the down position, turning them on. See below:
Note: The LED will flash in the “Registration Mode” Cadence (125 milliseconds on, 125 milliseconds off).
Dipswitch 1 is off (up) and Dipswitches 2 and 3 are on (Down), which takes about five (5) seconds.
Plug port 1 in – restoring power to the base unit
Wait 5 seconds – the LED begins flashing rapidly. For the next 30 seconds, while the
LED is rapidly flashing, PRESS THE “OK” (F3) BUTTON on the Handset.
((
))
REGISTRATING
PLEASE WAIT...
If successful, the handset will update:
((
))
> REGISTERED
HANDSET # 1
Note: If Handset 2 is being register the display will say “HANDSET #2”
The display shows that the handset is now on line:
((
))
JAN01 TUE 4:14
NAME 12
If the registration process is unsuccessful the following will be seen:
((
))
FAILED!
TRY AGAIN!
Before proceeding remember to place the dipswitches in the “Normal” position (All
switches up, in the off position) as seen below.
1 2 3
ON
1 2 3
ON
