XBLUE Networks, LLC.
HQ Add: 20801 N. 19
th
Ave., Suite 2, Phoenix, AZ. 85027
Tel: 913-599-2583 Fax: 913-599-3877 Email: sales@xblue.com
Encryption Number Length
Configure the Encryption Number length
Password Dial Prefix
Configure
the prefix of the password call
number
Restrict Active URI Source IP
Set the device to accept Active URI command
from specific IP address.
NOTICE! This feature
is usually used for device management and
will be described in
“F4 Administration
Guide
”
Push XML Server
Configure the Push XML Server, when phone
receives request, it will determine whether to
display corresponding content on the phone
which sent by the specified server or not.
Allow IP Call
If enabled, user can dial out with IP address
Enable Multi Line
Enable phone to make calls for 10 lines max, or
disable for 2 lines max.
Enable Default Line
If enabled, user can assign default SIP line for
dialing out rather than SIP1.
Enable Auto Switch Line
Enable phone to select an available SIP line as
default automatically
DND Response Code
Set the SIP response code on call rejection on
DND
Busy Response Code
Set the SIP response code on line busy
Reject Response Code
Set the SIP response code on call rejection
Play Talking DTMF Tone
Play DTMF tone on the device when user
pressed a phone digits during taking, default
enabled.
Play Dialing DTMF Tone
Play DTMF tone on the device when user
pressed a phone digits at dialing, default
enabled.
Caller ID Display Priority
Change caller ID display priority. The default
priority
is “Phonebook” > “SIP Display Name” >
“SIP URI”. User may select one of the options to
change the desired caller ID display priority.