X8222r User’s Manual Version 1.0
- 22 -
1.4 RFC-1483 Route
Select
RFC-1483 Route
from the Connection Type drop-down
menu.
Connection Name:
Choose a name that will identify the
connection.
VPI:
Enter the VPI value into this box.
VCI:
Enter the VCI value into this box. No two connections can
have the same VPI/VCI values.
Encapsulation:
Select LLC or VC Mux.
X8222r User’s Manual Version 1.0
- 23 -
QoS
:
Choose the QoS (Quality of Service) to be provided over
the connection. The QoS can take one of three possible values:
UBR, CBR, or VBR. If QoS is CBR (Constant Bit Rate), then it
requires a PCR (Peak Cell Rate) value. If QoS is VBR (Variable
Bit Rate), then it requires both PCR and SCR (Sustained Cell
Rate) values.
Option:
You may choose to enable
NAT
and/or
Firewall.
IP Address:
Enter the IP Address of the connection.
IP Subnet Mask:
Enter the Subnet Mask of the corresponding IP
Address.
Primary DNS Address:
Enter the IP Address of the primary
domain name server.
Secondary DNS Address:
Enter the IP Address of the
secondary domain name server. This will be used if the primary
DNS fails.
Third DNS Address:
Enter the IP Address of the third domain
name server. This will be used if the secondary DNS fails.
Click on the
Apply
button to complete the configuration. Please
note that configurations can only be permanently saved through
the
Maintenance
interface.
