manualshive.com logo in svg

Xantrex XTR 33-25, Operating Manual

Share
Download
Xantrex XTR 33-25 Operating Manual Download Page 121

Isolated Analog Programming Mode (ISOL)

M370046-01

4-29

4

Resistive-Controlled Voltage ISOL Setup

Activating ISOL Programming Voltage Mode

To activate ISOL programming voltage mode using an external 
resistor:

1. Turn the mode control knob to the VAP position or press the rotary 

knob/Enter button if the control knob is already at the VAP position. 

UAPr

 is displayed on the output voltage display.

2. Turn the Rotary knob/Enter button to select 

R IS 

(resistor source 

from isolated connector).

3. Press the rotary knob/Enter button to commit the selected mode.

LE U 

is displayed on the output voltage display.

4. Select the input source level using the rotary knob/Enter button.
5. Once the desired level has been selected, press the Rotary knob/

Enter button to commit the change.
The display will return to the normal display.

Deactivating ISOL Voltage Mode

To deactivate the ISOL voltage mode:

1. Turn the mode control knob to the VAP position or press the Rotary 

knob/Enter button if the control knob is already at the VAP position.

2.

UAPr

 is displayed on the output voltage display.

3. Turn the Rotary knob/Enter button to select 

nonE

.

4. Press the rotary knob/Enter button to commit the change. 

The display will return to the normal display.

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for XTR 33-25































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands