![background image](http://html1.mh-extra.com/html/xantrex/xs400/xs400_owners-manual_3437089027.webp)
Preparing for Installation
975-0054-01-01
2–5
Materials for XS400 and S400 Remote Switch
To install the XS400 and S400 Remote Switch, you require:
❐
DC cables (See Table 2-1 on page 2–9.)
❐
Appropriately sized connectors. Two DC connectors suitable for ¼
inch (6 mm) that go on the DC input cable terminals. The other cable
connectors will depend on your installation.
❐
Crimping tool for fastening lugs and terminals on DC cables (You
may find it more convenient to have the crimp connectors attached by
the company that sells you the cable.)
❐
DC fuse and Disconnect or DC circuit breaker (See page 2–9.)
❐
Four #10 hardware fasteners to mount the XS400
❐
Four #6 self-tapping screws to mount the S400 Remote Switch
Materials for AC output hardwiring
❐
Cable requirements:
•
within the range of No. 14 to No. 18 AWG (minimum size)
•
3 conductors
•
solid or stranded
❐
1/2 inch cable clamp
Summary of Contents for XS400
