15
may be necessary to switch the ignition
to the accessory setting to allow current
to flow from XPower Charger 2 to the
vehicle battery.
4.
Plug the XPower Charger 2 AC cord into
a standard 115 volt AC outlet.
5.
As the battery in your vehicle charges,
the green Power light and red Charging
light turn on.
6.
When fully charged, the red Charging
light turns off and the green Power light
remains on. The recharge time will vary
based on the capacity and discharge state
of your vehicle’s battery.
7.
Once the vehicle’s battery is fully
charged, disconnect XPower Charger 2
from the AC outlet and remove the DC
plug from the vehicle’s lighter socket or
12 volt outlet.
CAUTION
If the green Power light turns off and the red
Charging light turns on, immediately
disconnect it from the lighter socket or outlet.
The unit has detected an output short circuit
or reverse polarity on the DC connection.
Check the connection.