Installation
3–12
445-0145-01-01
Materials
The following checklist is a general list of required materials. Optional
components are indicated by an *.
p
Four corrosion-resistant fasteners sized #10 or larger for mounting the
inverter
p
Copper DC input cable as calculated in
•
Table 3-1, “ Recommended DC Input Wire Sizes & Lengths:
XPower 1200 Plus” on page 3–7
•
Table 3-3, “ Recommended DC Input Wire Sizes & Lengths:
XPower 1750 Plus” on page 3–9
p
Two 5/16 inch ring terminals sized for the cable diameter (or box-lug
terminals) to connect the DC cables to the DC cabling terminal
p
Lugs and terminals to connect the DC cables that connect to the
battery and fuse holder(s)
p
DC fuse(s) as calculated in
“Calculating Fuse/Circuit Breaker Size”
on page 3–10
and fuse holder(s)
p
Copper chassis ground cable as calculated in
•
Table 3-2, “ Recommended Chassis Ground Cable sizes: XPower
1200 Plus” on page 3–7
•
Table 3-4, “ Recommended Chassis Ground Cable sizes: XPower
1750 Plus” on page 3–9
p
Ring terminal (appropriately sized to connect copper cable to chassis
ground screw) that meets the following specifications:
•
#10 stud
•
UL/CSA approved
•
copper
•
tin-plated
p
Battery isolator (if connecting to a multiple-battery system)
p
Battery selector switch*
p
Alternator controller*
p
High-output alternator*
* Consult
Appendix B
and
Appendix C
to determine whether you need
these components.
XPower 1200 Plus 1750 Plus.book Page 12 Friday, October 21, 2005 4:19 PM
Summary of Contents for XPower 1000 Plus
